Skip to content
MOT Tester Exam Annual assessment · 2026/27
3 min read MOT Tester Exam Team

Group A vs Group B: Which MOT Annual Assessment Do You Sit?

Group A covers motorcycles, group B cars and passenger vehicles. What differs between the two MOT annual assessments, and what dual-class testers must do.

group Agroup Bmotorcycles
Illustration for Group A vs Group B: Which MOT Annual Assessment Do You Sit?

DVSA splits the annual assessment by what you are authorised to test. The split is simple; the consequences for a tester who works on both are not.

The two groups

Group A Group B
Vehicle classes 1 and 2 3, 4, 5 and 7
Vehicles Motorcycles and sidecars Cars, passenger vehicles and light commercials
Inspection manual Motorcycles Cars and passenger vehicles
Annual training At least 3 hours At least 3 hours

If you are authorised in both groups, the requirement doubles: at least 6 hours of training a year and two annual assessments.

What is the same

Three of the training topics carry the same names in both groups: lamps, reflectors and electrical equipment; the MOT testing guide; and braking. The testing guide is a single document, so that material genuinely is shared.

What is different

Everything that comes from an inspection manual — and that includes lamps and braking, not only the block labelled “inspection manual”. The two manuals are separate documents with separate standards, and the places they disagree are exactly where a dual-class tester picks the wrong answer from habit.

Some examples, taken from the current manuals:

Brake pad wear. The car manual lists a lining or pad worn below 1.5mm. The motorcycle manual sets it at 1.0mm.

Brake efficiency. For most cars the service brake requirement is a single figure — 58% for an M1 vehicle with a service brake operating on at least four wheels first used on or after 1 September 2010, and 50% for one first used before that date. Motorcycles are assessed control by control: one control must achieve at least 30% and the other 25%.

When a brake result becomes Dangerous. On a motorcycle, efficiency below the minimum requirement is a Major; efficiency of less than 27.5% overall is a Dangerous.

None of these is hard on its own. The difficulty is that a tester who spends most of the week on class 4 vehicles carries the car figures in their head, and reaches for them in the motorcycle assessment.

How to revise if you sit both

  • Treat them as two assessments, not one with extras. Revise group A against the motorcycle manual from the start, rather than revising group B and “adjusting”.
  • Make a short list of the differences. Every time you meet a figure that differs between the manuals, write both down side by side. That list is worth more than re-reading either manual.
  • Sit separate mocks. Mixing the two groups in one practice session hides exactly the confusion you are trying to find.
  • Leave time between them. There is no rule that the two assessments are taken together. Sitting them weeks apart keeps the figures from blurring.

Practise each group

Free questions for both are on this site: the group A motorcycle inspection manual and group A braking, and the group B cars inspection manual and group B braking. The full list is on the topics page.

How the app fits in

MOT Tester Annual Assessment keeps a separate question bank and separate progress for each group. You pick a group when you first open it and can switch from Settings at any time; working through group A never overwrites your group B results. It is independent revision material, written to the published training topics and not endorsed by DVSA.

Frequently asked

What is group A in MOT testing?

Group A is class 1 and 2 vehicles — motorcycles and motorcycles with sidecars.

What is group B in MOT testing?

Group B is class 3, 4, 5 and 7 vehicles — cars, private passenger vehicles and light commercial vehicles.

Do I need to take both assessments if I test both groups?

Yes. If you test vehicles in both groups you study all the topics, do at least 6 hours of training a year instead of 3, and take 2 annual assessments.

Is the minimum brake pad thickness the same for cars and motorcycles?

No. The car inspection manual lists a brake lining or pad worn below 1.5mm as a defect; the motorcycle manual sets the figure at 1.0mm.

Test yourself on this

Free practice questions for each of the 4 routes we cover, or the full 608-question bank and mock tests in the app.

Free practice questions →

More articles