Ask a tester what the annual assessment is about and they will name topics: brakes, lamps, the guide. Look at the questions and a different pattern shows. A large share of them, in every topic, ask the same thing in different clothes: what category is this defect?
The three categories
The inspection manual for cars and passenger vehicles defines them like this:
| Category | The manual’s description |
|---|---|
| Minor | Defects that have no significant effect on the safety of the vehicle or impact on the environment, and other minor non-compliances |
| Major | Defects that may prejudice the safety of the vehicle, have an impact on the environment, put other road users at risk, or other more significant non-compliances |
| Dangerous | Defects that are a direct and immediate risk to road safety or having an impact on the environment |
Those descriptions tell you the principle. They do not tell you the answer to a question, because the manual does not leave categorisation to judgement: each listed defect carries its own category.
Why judgement gets you the wrong answer
The trap in assessment questions is reasoning from how serious a defect feels. Two examples from the braking sections show why that fails.
The same component, two categories. A brake imbalance where the effort from one wheel is less than 70% of the maximum effort from the other wheel on the same axle is listed as one defect. An imbalance where it is less than 50% on a steered axle is listed as a separate, more serious one. The fault is the same kind of fault; the number decides the category.
The same result, two categories. On a motorcycle, brake efficiency below the minimum requirement is a Major. Efficiency of less than 27.5% overall is a Dangerous. A question that gives you a figure is asking whether you know there are two thresholds.
In both cases the right answer comes from the manual’s table, not from experience at the ramp.
How to answer them open book
You are allowed the manual, so use it deliberately.
- Identify the section before you read the options. Is this section 1, brakes? Section 4, lamps, reflectors and electrical equipment? Knowing the section numbers by heart is the single biggest time saver.
- Find the defect, not the component. Each sub-section ends with a table of defects and their categories. Go to the table.
- Read the whole row. Many defects have an (i) and an (ii) — a Major and a Dangerous version separated by a threshold or a condition.
- Check for an exemption by first-use date or class. A great deal of the manual turns on when a vehicle was first used. Stop lamps are a simple example: vehicles first used on or after 1 January 1971 must have two, one on each side; an older vehicle may have only one.
What to memorise anyway
Open book does not mean memorise nothing. With around an hour for 30 questions, you cannot look everything up. Worth holding in your head:
- the section numbers of the manual
- the handful of figures that come up constantly — for example, a car brake lining or pad worn below 1.5mm, and a parking brake efficiency of at least 16% for most vehicles
- the first-use dates that change a requirement
Everything else, know where to find.
Practise with the reference in front of you
The fastest way to learn the layout of the manual is to answer questions and check each one against its section. Every explanation in our question bank ends with the section and defect reference it came from, so each question doubles as a look-up exercise.
Try the cars inspection manual questions, the braking questions or the lamps questions free. Testing motorcycles? The group A manual questions are written against the motorcycle manual, where several of these figures are different.
How the app fits in
MOT Tester Annual Assessment is independent revision material written to the published training topics. It is not the real assessment and is not endorsed by DVSA. The figures above are from the inspection manuals as published at the time of writing; special notices change them, so always check the current manual on GOV.UK before relying on a figure at the test bay.